MCD 4.2 After Conferencing LS trunks not releasing

[christiankarl]

hi guys,

does anyone encountered this problem on analog trunks? got to play with descriptor thing but no luck! and also, co does not provide disconnect tone so you need to physically unplug the line from controller to have it release the joined trunks.



cheers

 

[wireman50]

Sounds like the disconnect clear time is wrong...that is set in the trunk descriptor (disconnect timer)...is that what you have been playing with?

 

[christiankarl]

hi wireman

yes..it's the disconnect timer im mentioning..i start with 100 upto 500 but still failed, any suggestion aside from descriptor?

i used to make a test from earlier version of 8.0 and it works..i do compare the cos(user/trunks)trunk attributes & system options against mcd4 but no luck..something in firmware has an issue.

 

[wireman50]

Try up to 800....