Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MBG/ICP Redundancy

Status
Not open for further replies.

poefie

Technical User
Mar 8, 2012
2
ZA
thread1329-1681167

Hi All.

I have a similar issue as per the referenced thread...

I'm currently sitting with 1 x MBG server and 2 x 3300 ICP's in a clustered configuration.

The phones all point to my MBG server. My MBG server currently points to ICP 1.

How do the get the MBG server to automatically connect to ICP 2, should ICP 1 fail?
 
You need a second MBG and put them in a cluster (Master/Slave)
 
The phones will still fail over to the other controller is one dies and the mbg is still up. Just add both in the icps form. But if you have resiliency at the controller level it is best to have multiple mbg's. Then you covered for all eventualities.
 
Thanks guys.

So just to be clear... Given my current resources (1 MBG and 2 ICP's), if I add the 2nd ICP to the MBG ICPs form, will the MBG then automatically connect to the 2nd ICP, should the 1st ICP (default) fail?

I will also try and source a 2nd MBG server.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top