Maximum limits on a 406V2

[mikem501]

Can I have a system configured as follows:
IP406V2 with 1x E1 PRI card
Phone Manager PRO and IPRO x 10
300 IP extensions
300 Users

Is this configuration comaptible?
I just want to have all these users that can communicate with each other however only 10 simultaneous users are registered at any point in time and that can make calls from the PRI E1.
Does the 406V2 supports 300 ip extensions and 300 users?

Many thanks.

 

[h382]

The 406v2 supports a maximum of 180 IP extensions, and a total of 190 extensions(180 IP plus 2 analog, 8 Digital)

 

[mikem501]

Hi Thanks,
Can the 412 Handle it then?

 

[h382]

Yes, the 412 can handle up to 360 extensions

 

[IPGuru]

Phtsical limits are 190 exts total however there is no hard coded limit to the number of virtual useres on an IPO
the limits are dependent on the size of the cfg file which is 192k
if you have a lage number of items of on type (users) it will reduce the cfg space available for other entries (groups, directory entries etc.)

 

[big70]

Just go to a S8300/G700 or an S8500/G650 saving you a lot of pain.


Greets Peter