MatWorX TCP/IP Ports

[viperman6012]

Hi!

I would like to know which TCP ports MatWorx is using on the local PC. The TCP port from the 2000IPS is fixed with port 60000. But the local PC is using always different ports. I scanned with Wireshark, but the range looks like if there are thousand ports. Does anyone know these ports or is it able to configure them somewhere?

 

[ctvi]

Why do you need to know that? It changes every time you log in and it is sequential. I had a look at my pc and it showed 54482. Everytime I logged on and off again, it used a different port i.e 54489 etc. The port used connecting to NEC is always the same i.e. 60000

You can look at all the ports and specifically both ends of the port you need to look at by typing c:\>netstat -n from a command prompt.

http://www.ctvi.com

 

[viperman6012]

I needed it because of a customer request who wants to know the used ports because of WAN traffic.
Thanx for your replay.