Authority code. I have been using a call accounting program(CAAB Ti)to allocate authority codes to a few of our admin users for outbound call access-unrestricted.The rest of the phones are partially restricted (code 55)-local only.
The problem I have been having for the past few months is that any new authority code that I enter does not register.So I'd like to use MATworX to enter the authority codes or even find out the problem. I am familliar with MOC thanks to you guys!Will gladly move on if someone can put my foot on the right track.
It seems there has been somewhat of an overkill on the system. Cmd 2A00 allows you to assign an authorisation code to a pattern which you then go on to set up how that functions. It would seem you have been setting up patterns for each individual auth code. You could instead have the example below.
2A00>2904:0739
2A10>0739:1 working perfectly
Then set
2A00>2222:0739
And 2222 will be able to do the same as 2904
You simply create a set of patterns (or use the ones you already have) and keep assigning those patterns according to needs,
Thanks OzzieG. I have followed your suggestion and problem solved.I have decided to follow your pattern for the working auth codes as well for simplicity.
Many Many thanks for your help OzzieG.Really appreciate it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.