MAT system 1

[ITSteveIS]

I've "inherited" the phone system at my company. We're still on MAT 6.6.

The person before me didn't keep good records or even manuals. We've had to "hire" them back to do some work on the system but we're getting tired of that and want to learn the commands in MAT System Terminal so that we can COPY and CREATE new DNs/TNs.

Is there anyone that can help?

What prompted this is that an admin's phone died (somehow got erased from the system) and now I need to add a new 3904 on the old TN/DN but I don't know how to add the AddOn device that lets this admin know which manager is on his/her phone at that moment. It almost looks like an extended AutoDial pad. But I can't add that seperately in the system. I've tried to copy another admin's phone but that won't let me. Gives me a SCH error.

Sorry for the long post!

Steve

 

[RCorrigan]

If I remember correctly, there is a check box for add-ons when you actually create the set - it doesn't get added seperately

<Do I need A Signature or will an X do?>

 

[johnpoole]

the sch may be because the copy from set has bfs keys, the prompt aom 1 will add the add on module, if your using bfs keys the command is key x bfs 20 0 0 0, with the tn of the monitored set.. if your using a different key set up use the same type of keys and key numbers.. bfs keys can be a pain, due to having to modify sets before and after a copy, i would use mat, or otm if you can get around it.

john poole
bellsouth business
columbia,sc

 

[ITSteveIS]

AOM 1? Great, thanks.

Now, can you advise me where to use AOM 1? Like, if you were about to add a module to a TN. The TN and DN I'm using are DN 185 and TN 019 0 00 04.

I don't know what LD to use AOM or even the correct syntax!

So new... sorry!

Steve

 

[johnpoole]

REQ: chg
TYPE: 2616
TN 64 0 14 14
ECHG yep
ITEM aom 1
ITEM

all command are from load 20, the same command will add keys at the ITEM prompt just type key 21 scn 4940, for a non ringing line, or any key that you are trying to add, the best bet is to prt the dn/tn of a set and then put the same type of keys on it



REQ: prt
TYPE: dnb


CUST 0
DN 1962
DATE
PAGE
DES

DN 1962
CPND
NAME Switchroom
XPLN 10
DISPLAY_FMT FIRST,LAST
TYPE MIX
TN 088 1 03 15 DES TEMP 23 DEC 2004
TN 064 0 14 14 KEY 00 H MARP DES SWITCH 23 DEC 2004
(2616)


NACT
REQ: prt
TYPE: tnb
TN 64 0 14 14
DATE
PAGE
DES

DES SWITCH
TN 064 0 14 14
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 1
FDN 3301
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 1
SCI 0
SSU
LNRS 16
XLST
SCPW 1962
CLS CTD FBD WTA LPR PUA MTA FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTA CLBD AUTU
GPUD DPUD DNDD CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO 0
HUNT 3301
LHK 0
LPK 1
PLEV 02
FCAR NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 MCR 1962 0 MARP
CPND
NAME Switchroom
XPLN 10
DISPLAY_FMT FIRST,LAST
01 MCR 1962 0
CPND
NAME Switchroom
XPLN 10
DISPLAY_FMT FIRST,LAST
02 AO6
03 TRN
04 CFW 16 7711*
05 TRC
06
07
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16 4545
12 ADL 16
13 ADL 16
14 MWK 3301
15
16
17
18
19
20
21


john poole
bellsouth business
columbia,sc

 

[ITSteveIS]

Thanks, John.

But here's my problem doing that:

>ld 20

REQ: chg
TYPE: 3904
TN 019 0 00 04
ECHG yes
ITEM aom 1SCH3301 <- that SCH3301 happens when I hit enter
ITEM
SCH0101
ITEM

And here's the phone:

REQ: prt
TYPE: tnb
TN 019 0 00 04
DATE
PAGE
DES

DES 475
TN 019 0 00 04
TYPE 3904
CDEN 8D
CUST 0
FDN 350
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA ADD HFA GRLD CRPD STSD
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 0
HUNT 350
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 MCR 185 0 MARP
CPND
NAME Debbie C.
XPLN 27
DISPLAY_FMT FIRST,LAST
01 MCR 185 0
CPND
NAME Debbie C.
XPLN 27
DISPLAY_FMT FIRST,LAST
02 SSU 0000
03 ADL 16 0
04 ADL 16 0
05 ADL 16 0
06 ADL 16
07 ADL 16
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 350
17 TRN
18 AO6
19 CFW 4
20 RGA
21 PRK
22
23 SCC 0001
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 23 DEC 2004

Keys 32 thru 53 would be the AOM I suppose, but they can't be added for some reason.

Thanks!

Steve

 

[johnpoole]

very strange, i used the prompts on my 2616 before i posted them and never had a problem, did you look up sch3301? i think that is not recognized commmand, but my merls are at work.. i'm not at work until monday so if your post is still open, i'll test on my 3904 to see if i need a cls mark, i've added aom's to the 3900 series but don't remember if it was 3904, if you have a 3904 with a aom, post it

john poole
bellsouth business
columbia,sc

 

[I2007]

The AOM is only for add on modules working with 2616 & 2216 phones. On the 390x series you have to use DBA or KBA depending of what type of module you have. Display based or key based module.

i2007

 

[ITSteveIS]

DBA 1 did it. I now have the AddOn displaying and I've already added the BFS' to it.

Thanks to the both of you for taking time to help me!

Steve

 

[johnpoole]

DBA .. used it before but did a mind freeze on that one, glad you found the right info

john poole
bellsouth business
columbia,sc