Hello all... I am unable to use the MAT to connect to a 2400 ipx... When I try to login, it gives me Read/Write error occured... The customer says that they recently had the power in the building go up and down several times in a row (this would not cause issues with the pbx, its backed up) so I am thinking that the MAT software is possibly corrupted, but I want to just check and see if there are any other thoughts out here before I try to uninstall/reinstall, or if anyone had any info on something I should check out before doing anything to the MAT... Thanks...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MAT connection issues, 2400 IPX.
- Thread starter doeswhat
- Start date
belevedere
Instructor
Your error does sound like the PC, however, in that system version the ports on the IO cards tend to go bad with power/lightning hits. You could try resetting the IO card. Anything else running off of that card will be temporarily disconnected (MCI, SMDR, etc.). A reset is quick, around 20 seconds.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question