NortelGuy585
Technical User
Is there a way on MICS 7.1 to mass program all the extension's at once?
- Keith "Norstar Newbie"
- Keith "Norstar Newbie"
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mass program extension's 1
- Thread starter NortelGuy585
- Start date
- Status
-
1
- #2
curlycord
Programmer
No
But you can do a set copy to a range of DN's....then program the small differences if required.
=----(((((((((()----=
curlycord
But you can do a set copy to a range of DN's....then program the small differences if required.
=----(((((((((()----=
curlycord
- Thread starter
- #3
NortelGuy585
Technical User
Ah ok! Tried that and it worked great! thanks!
- Keith "Norstar Newbie"
- Keith "Norstar Newbie"
- Status
Similar threads
- Locked
- Question