Masking internal Caller ID. CCM 4.2

[MassDeployer]

Is there a way to Mask the caller ID for the caller's internal calls? We would like it to show a different number than it's true extension number. Thanks

Kind Regards,

MassDeployer

 

[MTandSAV]

yes, you can. You can choose to send general number with.
If i'm not mistaken just below where you fill in the caller display, ie name.

CCNA, CCNP..partly

 

[MassDeployer]

Tried It...the ID also inlcudes the true extension number dispite what this field says.

Thanks

Kind Regards,

MassDeployer

 

[soleman52]

Check the "Ignore present indicators on the dn config menu

Check this check box to configure call display restrictions on a call-by-call basis. When this check box is checked, Cisco CallManager ignores any presentation restriction that is received for internal calls.

Use this configuration in combination with the calling line ID presentation and connected line ID presentation configuration at the translation pattern level. Together, these settings allow you to configure call display restrictions to selectively present or block calling and/or connected line display information for each call.