Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MAS2 Dialogic Board - Ports Won't Come Online

Status
Not open for further replies.

bseymour

Technical User
Feb 12, 2004
104
US
We are running MM 5.2 with QSIG integration. Two application servers and one store server. MAS2 has 2 T1 connections to our PBX.

After reboot these ports will not come back online. Any ideas? It appears in looking at the back of the server that we actually have two boards, one for each T1 connection.

Could they have both gone bad? It recognizes the T1 connetions since the light goes red when I pull the cable.

 
Try rebooting again. If that doesn't work swap the cables to your other MAS to see if they come up.
 
We got this resolved. The dialogic boards somehow lost their configuration after applying a service pack. Once we reconfigured everything came back online.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top