MAS NIC speed configuration

[goku78]

Hello folks,

Do you know the NIC configuration for the MAS connection?
At this moment I have been searching best practice for this process but I am not sure about the information I found.

Is there an specific speed I need to have in the NIC?

Kind regards
Juan Cardoza

 

[KenMeans]

It really depends on what your port speed is set for on the network side. But i usually set it to auto

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[kepetersen]

Goku... remember that in the Exchange storage server version of Modular Messaging that you can't mix-n-match hardware. In other words, you can't use an Avaya MAS with a CPE (customer provided hardware)MAS. Both sides (MAS NIC and Customer NIC) must be set the same.

 

[AtAvaya]

Please review

https://support.avaya.com/kb/ext/ADMN101882

which describes this issue.