Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MAS NIC speed configuration

Status
Not open for further replies.

goku78

IS-IT--Management
May 7, 2013
33
MX
Hello folks,

Do you know the NIC configuration for the MAS connection?
At this moment I have been searching best practice for this process but I am not sure about the information I found.

Is there an specific speed I need to have in the NIC?

Kind regards
Juan Cardoza
 
It really depends on what your port speed is set for on the network side. But i usually set it to auto

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Goku... remember that in the Exchange storage server version of Modular Messaging that you can't mix-n-match hardware. In other words, you can't use an Avaya MAS with a CPE (customer provided hardware)MAS. Both sides (MAS NIC and Customer NIC) must be set the same.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top