Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MAS 90 v4.05 on Windows Server 2008?
- Thread starter DCIGUY
- Start date
Hello Skip.. Thanks for this information. But are you sure Sage will support Mas/90 version 4.05 on Windows 2008 server? Their supported platform matrix only indicates 4.3 is supported. Did something change since 2/11/09 when that was released?
The reason I ask is we recently installed a new Windows 2008 server (32-Bit standard) and the issue we had was with the darn Firewall included in 2008 server. We disabled that as well as SMB 2.0 (went back to SMB 1.0 to disable opportunistic locking).
Anyway, all is running extremely well. We are just concerned that if we have a system issue it will not be supported by Sage when we call. What has your experience been?
Thanks
Dave
The reason I ask is we recently installed a new Windows 2008 server (32-Bit standard) and the issue we had was with the darn Firewall included in 2008 server. We disabled that as well as SMB 2.0 (went back to SMB 1.0 to disable opportunistic locking).
Anyway, all is running extremely well. We are just concerned that if we have a system issue it will not be supported by Sage when we call. What has your experience been?
Thanks
Dave
4.30 only is supported on Server 2008.
Dawn
Visit Sage's Online Community
Dawn
Visit Sage's Online Community
- Status