Hi all, I would like to map a 4-digit extension (1234) to one of our other offices in a different state. I would like the 4-digit extension to actually dial the full 11-digit number (1-222-333-1234). I know this is possible but I have never programmed this before. We have an Option 11C unit, and I am pretty familiar with it, though I am by no means an "expert". Any walk-through advice on this would be greatly appreciated! Thanks in advance!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mapping 4-digit extension to a 11-digit long distance number
- Thread starter CiscoTech
- Start date
acewarlock
Technical User
Let me think on this awhile, I know this should work.
But in the mean time, does the switch your doing this on use 9 to make a call?
If it's going to Vmail and it shouldn't be there has to be a reason so let me get back to you on this.
But in the mean time, does the switch your doing this on use 9 to make a call?
If it's going to Vmail and it shouldn't be there has to be a reason so let me get back to you on this.
acewarlock
Technical User
PS post the CDB
LD 21
REQ PRT
TYPE CDB
CUST 0
And the CFN
LD 22
REQ PRT
TYPE CFN
LD 21
REQ PRT
TYPE CDB
CUST 0
And the CFN
LD 22
REQ PRT
TYPE CFN
- Status
Similar threads
- Locked
- Question
