MAPD Measurements

[notbrokedontchangeit]

Hi,

Does anyone know of a way to measure the amount of traffic in one day on a MAPD.
Is it simply a case of measuring the messages and that will give a sum total of the messages in a twelve hour period; the reason being is my customer is looking at whether they need another one or not.
Thanks in advance

 

[mikeydidit]

This may be the command you are looking for.

AUDIX              Active           Alarms:    A                       Logins:
list measurements load day                                                Page 1
                            LOAD DAILY TRAFFIC
                      Date : 04/03/08               Ending Time: 14:17


TOTAL SUBSCRIBER THRESHOLD EXCEPTIONS
                     Lists: 0                        List Space: 0
      Message Space, Lower: 14                            Upper: 1
Subscribers Over Threshold: 26

    Deliveries Rescheduled: 64

   Maximum Simultaneous Voice Ports: 17
Maximum Simultaneous IMAPI Sessions: 0

    SYSTEM STORAGE              Used (hours)   Free (hours)
      Total Storage          :      38.6          172.4
         Message Storage     :      19.7
         Voiced Name Storage :       0.8                     % Remote: 10
         Announcement Storage:      18.1

This is just the first page, so what you need will be on page 2

Port Usage Data (Seconds)
     1- 8:   10254  7235   6911   7412   6732   7002   7239   6481
     9-16:   7423   6496   8320   7022   7978   6748   6547   6941
    17-24:   7100   6931   6771   7498   6240   6931   7602   7352
    25-32:   0      0      0      0      0      0      0      0
    33-40:   0      0      0      0      0      0      0      0
    41-48:   0      0      0      0      0      0      0      0
    49-56:   0      0      0      0      0      0      0      0
    57-64:   0      0      0      0      0      0      0      0

Port Peg Count Data (Number of Calls)
     1- 8:   245    208    207    201    206    203    199    214
     9-16:   196    208    184    208    207    207    209    198
    17-24:   200    207    204    202    215    202    189    204

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[PhoneGuyNJ]

No he is talking about MAPD, not Audix.
What is your customer trying to do that makes them think they need a MAPD? That would help a lot...

 

[Cti4all]

Login to MAPD board and review the Status screens. Default will show messages To/From Definity in 30 min rolling summary. Counter can be reset to different intervals.

The last MAPD release with R8 CVLAN has some more detailed message count utilities but requires Avaya support as it requires command line access to enable. Once enabled, can give high water marks etc.

In CM, you can Status BRI with the BRI port assigned to the MAPD ports (LIST STA TYP ASAI/LIST STA TYP ADJLK will give you a list of all MAPD ports).

Newer releases of CM offer the STAT CTI commands which can give you message counts for all CTI links on a single screen. I think that is CM2+.