Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Map line to extension

Status
Not open for further replies.

hoaacs

Technical User
Jul 10, 2009
10
US
Partner ACS R7

How do I map Incoming CO line 5 to extension 14?

I prefer to use PC administration if possible


Thank you and have a great day
 
What do you mean, "map Incoming CO line 5 to extension 14"?

Ext. 14 doesn't already have Line 5 assigned to a button on it? #310-14-05-3, press button to assign to.

Ext. 14 already has Line 5 assigned to it, but doesn't ring? Centralized Telephone Programming, press the line button to toggle the ringing.

Ext. 14's voice mail should answer Line 5 when it goes unanswered? #206-05-2, #208-05-14

To use the PC administration requires that you connect, download the translations, make the changes, upload the new translations, and restore/restart the syetem. For such a small change, it's more trouble than it is worth.
 
i will clear this up

Simple DID

I have POTS line plugged into CO5 (line5) the phone number for the line is 555-1212. When someone calls in on 555-1212 i want that call directed to extension 14.


Thank you for the reply
 
Start - Programs - Partner ACS R7.0 Administration - Partner ACS Administration

When the program opens, and asks you what release file to create, click on Cancel

File - Connect to PARTNER System

Select the connection method, Next

Fill in the telephone number, OK

When prompted for the password, fill it in and click OK

Administration - Retrieve System Information

Give it a name, and save

Click on the + next to Extensions in the left hand pane

Click on the + next to Ext. 14

Click on Button Programming

Click on the button you want to program as Line 5

Click on Line/Pool Assignment

Click on the line you want

Click on OK

Use the Drop Down box at the top that saya Button Programming Ext. 14 to move to each extension, find Line 5, and click on it. Change the Ringing Options to No Ring. Click on OK

File - Save As - Give it a new name

Administration - Send System Information to PC Card

Select the new file, OK

After file is sent, Administration - Restore System Translations from PC Card




Or, Feature 00
Left Intercom Twice
#301-14-05-1
Right Intercom Once
Dial an extension number other than 14
Toggle Line 5 to No Ring
Right Intercom again
The next extension number
Toggle Line 5 to No Ring
Lather, Rinse, Repeat
Feature 00

 



You are the man, Thank you very much
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top