Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manual

Status
Not open for further replies.

TechyG

Vendor
Oct 22, 2009
97
0
0
ZA
Hi All

I am looking for a SL8500 - IBM LTO5 drive tray manual... I checked on the Oracle website... according to them they don't have...

The issue I have having is the drive fail to come online "not functional".

The drive works on another tray and the slot also works...

When i try another drive on the tray - same problem.

I swapped the card, psu and psu cable.. still the same issue.

It is one of the other cables...

Regards
TechyG

 
Are the interface boards on the tray the same PN? I would swap the board to the tray that it works on and see if it follows.

Andy
 
Never mind. re-read your post and it says t=you swapped the card along with the PS and cable. It could be the library interface cable. If the library cannot communicate to the drive, it will show not functional.
 
Hi
The problem is mostly with the Belisarius Cards... I replaced the Bel cards..problem solved.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top