Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manager 5.2.61

Status
Not open for further replies.

TourPro

Programmer
Mar 8, 2007
70
US
I am getting the following error when try to pull the config. "service command failed. Cause (error code -2). I have uninstalled and reinstalled with no success. Any thoughts?

ACA - Implement: IP Telephony
ACS - Implement: IP Office
 
Try the 4.1 as you can manage that system with it.

ACE - Avaya Certified Expert
ACI - Avaya Certified Instructor
 
This was common in the early 3.2 software. We had a site we ended up rebuilding because no manager version could get in.
 
I have had this, try from another machine with a clean manager install.
Its either some form of curruption of manager or something with in .net playing up.
I have a site from my work laptop I can never save anything into. BUT its fine from home.



ACA - IP Office Implement
ACA - IP Telephony
CCENT - Cisco ICND1
CCNA - Working towards.
 
Dont know if it actually fixed anything but I ended up sending a offline config to the system and have'nt had the problem since?

ACA - Implement: IP Telephony
ACS - Implement: IP Office
 
PureGold your post awhile ago about the DEP settings fixed my reporter issue! Thanks man.

ACA - Implement: IP Telephony
ACS - Implement: IP Office
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top