man-down DECT feature - Where set notification? 2

[securipdect]

Hello, I have one system MD110 BC12 with ASCOM TATECO DECT SMS and is working fine.
I have DT432 DECT phones, the MAN-DOWN and NON MOVEMENT is set in the DT432, where can be set the notification?

can the alarm set to a digital , analogue or DECT DT432 only?

Where can be set the alarm?

Best Regards

 

[doktor]

The alarms can only be set to DECT DT432 or other DT4xx DECT handsets. (not to other phone types).
The MD110 and the ASCOM DECT system have a common interface the NIU board.
It is also possible to send the location of the DECT handset in case of man down (no movement). The identity (number) of the base station is send togehter with the alarm to other DECT handsets and to the alarm console.


///doktor

 

[securipdect]

Hello, thanks doktor.
Can the alarm be set to another DT432?
We are able to send SMS between portables, only alarm man-down and non movement is not set, extension 7777 send a sms to 7778 but no alarm. In Alex no info avaiable.
BR

 

[etompau]

Alarm information from DT422, like man-down or push button alarm is handled in the CPDM/IMS unit. Here you define actions that will be activated on certain alarm types. Actions can be an SMS to another portables.

 

[securipdect]

Hello, thanks etompau.
i dont have that CPDM/IMS manual, and the help file in application are poor.I´m able to send SMS even using html webpage, I cant find man down notification.
BR

 

[etompau]

You need to find the function "Basic Alarm Manager" in the websetup of the IMS/CPDM unit. There you can define actions that will be activated by man-down or push button alarms.