making phone internal calls only

[bhorocks]

I want to convert a phone to internal dialing only.

what do i need to change to make that happen?

thx

DES internal call
TN 004 1 05 13
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 8290 0 MARP
AST NO
IAPG 0
HUNT 8499
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
XLST
SCI 0
CLS UNR DTN FBA XFD WTA THFD FNA HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSA-CSI LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
DATE 25 OCT 2005

 

[worldwidedialtone]

Change yor NCOS to what you have in your RLIs to only be able to make "on switch" calls. Usually NCOS 1

MIKE

 

[bhorocks]

right on thx. i'll give that a try

 

[hawks]

The easiest way is to make a change in the CLS of the phone.
CLS = FR2

 

[johnpoole]

and if i had never programed your box.. i would ncos 0 (or 1) and cls fr2..

ncos and tgar are built unique on each site.. cls is cls

john poole
bellsouth business
columbia,sc