Hi
I have a g3siv6 at a former Motel6. They want the attd backup (8434dx) to ring not alert when position busy is pushed on the 302D consol. It works at other locations, but not at this one. The owner wants me to program it like the other sites where if pos busy is pressed every attd call including 0 goes to the backup digital sta (8434dx) then bridge an analog sta (cordless) phone to it.
Night mode defeate the auto attendant so that is not an option. I have tried everything even to the point of add night auto attd with a VDN and VECTOR where if digit is 0 goto sta 701. On the recording if calling party dials 0 it still goes to the attd consol not the night destination sta (701). I don;t want to add 0 to the dial plan and remove attd consol.
ANY SUGGESTIONS
thanks
Chris
I have a g3siv6 at a former Motel6. They want the attd backup (8434dx) to ring not alert when position busy is pushed on the 302D consol. It works at other locations, but not at this one. The owner wants me to program it like the other sites where if pos busy is pressed every attd call including 0 goes to the backup digital sta (8434dx) then bridge an analog sta (cordless) phone to it.
Night mode defeate the auto attendant so that is not an option. I have tried everything even to the point of add night auto attd with a VDN and VECTOR where if digit is 0 goto sta 701. On the recording if calling party dials 0 it still goes to the attd consol not the night destination sta (701). I don;t want to add 0 to the dial plan and remove attd consol.
ANY SUGGESTIONS
thanks
Chris