Magix POTS line assignment

[mamut0o1]

Good afternoon,
I have a Magix Avaya switch and I was wondering if someone could point me to the right direction of how to assign a POTS line to an Extension? I believe I have a spare POTS line port that I can use but I have never done this before. Can some one explain to me how to accomplish this?

Thank You in advance.

 

[TouchToneTommy]

Menu
Sys Program
Start
Extensions
Lines/Trunks
Dial the Extension Number
Enter
Entry Mode
Dial the Trunk Number
Enter
Exit

 

[mamut0o1]

Thank you so much..

Menu
Sys Program
Start
Extensions
Lines/Trunks
Dial the Extension Number Is this my 4 digit extension ex: 6606
Enter
Entry Mode
Dial the Trunk Number is this my POTS number such as 718 777 7777?
Enter
Exit

Thank you so much again

 

[TouchToneTommy]

6606 is the Extension Number

The line number is the Line Port that the line is connected to - 801, 802, 803, etc. all the way up to 880.

You'll need to know which port the line is connected to, or if you have the line assigned to another phone, you can go to the phone, press SPKR, dial 00, and press the line button to see on the display the line number. Press SPKR again to exit out of programming on that phone.

 

[mamut0o1]

Thank you so much I will give it a try!

 

[TouchToneTommy]

In the above, press SPKR, then # and then 00