Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MADN

Status
Not open for further replies.

finest

MIS
May 11, 2011
58
US
We are attempting to use MADN and internal calls are fine but external calls receive busy.

Button programming
6004 (the "phantom" extension) (there is a user and a extension created, no device has ever been logged in/plugged in)
1 Appearance a
2 Appearance b
3 Appearance c

6001 (user 1)
1 Appearance a
2 Appearance b
3 Appearance c
4 MADN Single Call off 6004/1
5 MADN Single Call off 6004/2
6 MADN Single Call off 6004/2

6002 (user 2)
1 Appearance a
2 Appearance b
3 Appearance c
4 MADN Single Call off 6004/1
5 MADN Single Call off 6004/2
6 MADN Single Call off 6004/2

Calls from 3508 to 6004 ring normally on 6001 and 6002
Calls from an external number to a DID pointing to 6004 get busy signal (6004 has voicemail disabled) - and never ring 6001 and 6002.

See Monitor output below.

Is there a setting to not treat 6004 as logged out?
Should 6001 and 6002 be ringing for external calls even though there is not actually 6004 connected?

Thanks.




13:55:20 259205637mS CMCallEvt: CREATE CALL:426 (b4028680)
13:55:20 259205637mS CMCallEvt: 0000000000000000 0.939526793.0 -1 BaseEP: NEW CMEndpoint b4032ae0 TOTAL NOW=2 CALL_LIST=0
13:55:20 259205638mS CMLineRx: v=0
CMSetup
Line: type=SIPLine 101 Call: lid=101 id=939526792 in=1
Called[17477885836] Type=International (1) Reason=CMDRdirect SndComp Calling[13104555555@66.85.56.10] Type=International Plan=Unknown
BC: CMTC=Speech CMTM=CallIndSigCon CMTR=64 CMST=Default CMU1=ULaw
IE CMIEFastStartInfoData (6) 4 item(s)
IE CMIECallingPartyName (110)(Type=CMNameDefault) name=+13104555555
IE CMIERespondingPartyName (228)(Type=CMNameDefault) name=+13104555555
IE CMIERespondingPartyNumber (230)(P:100 S:100 T:1 N:0 R:4) number=13104555555@66.85.56.10
IE CMIEDeviceDetail (231) c0a80a0f38000a88 LOCALE=enu HW=11 VER=12 class=CMDeviceSIPTrunk type=0 number=101 channel=1 features=0x0 rx_gain=32 tx_gain=32
ep_callid=939526792 ipaddr=192.168.10.15 apps=0 loc=999 em_a_loc=999 em_d_loc=0 features2=0x0 is_spcall=1 ignores_dtmf=0
avgsid=<>
13:55:20 259205638mS CMCallEvt: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: StateChange: END=A CMCSIdle->CMCSDialInitiated
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: LOOKUP CALL ROUTE: GID=101 type=1 called_party=17477885836 sub= calling=13104555555@66.85.56.10 calling_sub= dir=in complete=1 ses=0
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: SET BESTMATCH: length 0 vs -1 match= dest=VM:NoDNIS climatch -1 vs -1
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: SET BESTMATCH: length 12 vs 0 match=+17477885836 dest=6004 climatch -1 vs -1
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: AMBIGUITY: match=+1747788xxxx dest=#
13:55:20 259205638mS CMCallEvt: Priority hike: call 426 priority 0->1
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: LOOKUP ICR: DDI=+17477885836 CGPN=13104555555@66.85.56.10 (Destination 6004 CLI ) => CDPN=6004
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: ADD TARGET (N): number=6004 type=1 depth=1 nobar=1 setorig=1 ses=0
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: SET USER: jf4 orig=1
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: ADD USER: jf4 depth=1 disallow_cw=0 dnd=0 real_call=1 group_call=0 type(CMNTypeInternational) incl(0x0) excpt(0x0), allow_redir(1) remote=00000000 simult 0 (0) r_
lic=T
13:55:20 259205638mS CMTARGET: TryLoggedOutTargeting for user jf4 Failed Normal
13:55:20 259205638mS CMTARGET: FoundKnownSystemTargets ICR cache hit
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: NO INITIAL TARGETS: jf4
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: ADD USER: jf4 depth=1 disallow_cw=0 dnd=0 real_call=1 group_call=0 type(CMNTypeInternational) incl(0x40) excpt(0x40), allow_redir(1) remote=00000000 simult 0 (0)
r_lic=T
13:55:20 259205638mS CMTARGET: TryLoggedOutTargeting for user jf4 Failed Normal
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: SELECT: TRY VOICEMAIL orig_hg() orig_user(6004)
13:55:20 259205638mS CMTARGET: c0a80a0f38000a88 101.939526792.1 426 SIPTrunk Endpoint: Fallback() targeting failed
13:55:20 259205638mS CMLOGGING: CALL:2024/11/1213:55,00:00:00,000,13104555555@66.85.56.10,I,6004,17477885836,+13104555555,,,0,,"",0,n/a
13:55:20 259205638mS CMLineTx: v=0
CMReleaseComp
Line: type=SIPLine 101 Call: lid=101 id=939526792 in=1
Cause=180,
13:55:20 259205638mS SIP Tx: UDP 192.168.10.15:5060 -> 192.168.10.18:5060
SIP/2.0 486 Busy Here
Via: SIP/2.0/UDP 192.168.10.18:5060;branch=z9hG4bK-s1632-001534845283-1--s1632-
From: <sip:+13104555555@66.85.56.10>;tag=sansay1910764793rdb18898
Call-ID: f0dab25979514e11faed6f6268168a55
CSeq: 1 INVITE
Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,INFO,NOTIFY,UPDATE
Supported: timer
Server: IP Office 12.0.0.0.0 build 56
Reason: Q.850;cause=17;text="User busy"
To: <sip:+17477885836@272895-1-sip.apeiron.io>;tag=a7bb22048b20d9a7
Content-Length: 0
 
Phantom MADN user does not need any extension, you should create just the user (no license needed) and proceed as you did
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top