M824

[BR8770]

Folks, I am adding a station module to an 824; do I need to turn down the KSU or can I add it just like an 0x32 please? Can't remember...
been to long...just an 'ole retired phone guy.

 

[allworxguy]

You can hot plug the cabinet, but you can't hot plug the expansion card.

Marv ccna

http://www.telemarv.ca

 

[BR8770]

I have a copper 6-prot expansion card in the cabinet (KSU) now. So I can just hot plug the station module w/o powering down the KSU. Correct please?

 

[allworxguy]

Connect the 2 cabinets together BEFORE you apply power to the expansion cabinet.

Marv ccna

http://www.telemarv.ca

 

[BR8770]

Ok will do thanks Marv.!!

 

[misseditbythatmuch]

I believe on the expansion card, connect trunk modules from top down and station modules from bottom up.

 

[BR8770]

Yep, I got that part right!
Thanks Missedit!