M8 Module connection info

[tjcom]

Lost my doc's on installing the M8 Caller ID module to a 8X24.
can anyone give me a quick install guide on how to?

I know it terminates on to a BIX with a 25 pair amphenol.
Is it a Telco line in first pair and KSU line out on second pair pattern.

a little help would be appreciated.

thanks

 

[bkrike]

sure- after you hook it up you still have to program the system for CLID. Did you lose that manual too?

 

[tjcom]

what does your "sure" mean?
1.sure it works as a first pair in and second pair out
2.sure what ever

I know about the CLID programming, and I do have the manual.

thanks for your effort

 

[bkrike]

anytime

 

[jahms]

If I remember correctly you go straight through the block. Basically you are putting the block in the middle of your line off the demarc to your system. Hope that helps.

 

[silver987]

Give me your email and I will send you the docs for an CII.

 

[tjcom]

thanks Silver987!

good to see some nice people in this world!

mailto:sales@tjcommunicationsupply.com

 

[DonRight]

A word of caution, unlike A-typical Norstar connections, this affair is polarity sensitive.

Be aware.