M39XX Firmware

[Crash4723]

thread798-1732903

Hey guys,

I am looking for firmware for the M39xx sets. Particularly 9.4 for the M3904, 8.9 for the M3903, and 8.4 for the M3902.

Can anyone help me out?

Thanks in advance

 

[hawks]

The correct firmware for those phones should be on your switch. Don't think you can put a higher firmware and a phone and then have it work properly on a lower release of the switch.

 

[Crash4723]

The firmware is loaded onto the SSC card then pushed to the phones, I am sure it all depends on the release of the CS1000 software, but I have all the releases so I am not concerned about that, I am just lacking these specific firmware releases for these phones. I am thinking 9.4 is fairly newish and none of my systems have it. I am not the end user, I am just a middle man in a warehouse that a customer asked to load a specific firmware. About a year ago we were able to load 9.0 onto a system and push it out to the phones successfully, I am just not sure how far up the line 9.4 is and if there is a copy of the firmware outside of the official Avaya channel.

 

[Firebird Scrambler]

I've found some software, which I've sent out today. Hopefully it will help you.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[hawks]

I think the 9.4 was either in release 7 or 7.5

 

[Firebird Scrambler]

I have firmware

3902 = 84

3903 = 88 and 90

3904 = 90 and 93

3905 = 90 and 93


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[Crash4723]

Thanks guys for all the help. Firebirdscrambler had exactly what I needed.

Thank You!