M3904 -- different ring for DN?

[elypu]

Hello,

I have a M3904 on an ACD (key 0). There are two other DNs on
keys 1 and 3. I would like to set up the phone set with a different ring on key 3, so that the user can identify wich DN is ringing. I was wondering if this is possible. We use a Meridian Option 11 PBX.

Thank you for your help.

 

[EddieDuece]

I don't think this is do-able........

 

[elypu]

Hi Eddie,

I tried to find some way in the Nortel documentation. I was
not able to find anything. So, either there is no way or I
did not search long enough.

Anyway, thank you for your reply.

 

[phonedude10]

check feature distinctive ring by dn - CLS=DRDA and you will get 2 new prompts under each key DNRO and DNRI that you assign a ringing index number to.

 

[elypu]

Hi Phonedude10,

Thank you for your reply.
I will try to see what can I do.
I will post an update after that.

Thank you for your answer.

 

[elypu]

Hi Phonedude10,

Your advice was right on the subject.
I enabled DRDA in LD 11 and then I modified DNRI for the
key from idex zero (the default) to 4.

Thank you for your help.