M3904 all can join in on call

[vortec1]

I have six 3904's in one room and the all have the same line on Key 0 and do not want line preference so when you go off hook you can hear the conversation on an active call on Key 0 from any one of the phone sets.Is there antything in the CLS to stop this? RLS 7.5.

 

[trvlr1]

Is the number also on an analog set?

 

[vortec1]

trvlr1 thanks for responding, yes it is on an analog for a bell.

 

[hawks]

Is it an extension number or an actual outside line that is assigned to the phones?

 

[PERRYPJ]

Make all the phones and the single line a MCR

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[gwebster]

To make a multiple call ringing arrangement with a mix of digital/IP sets and analog set(s):
- change the SCR key on all digital/IP sets to NULL
- change the analog set to CLS MCRA
- change the NULL keys on the digital/IP sets to MCR

 

[vortec1]

Thanks all, I will make it an MCR. Once trvlr1 asked if it was on a analog, it jared my memory as it's been a while to add a MIX.