fartingcamel
Technical User
I'm using a Display-Based Expansion on a 3904, we did an INI on the pbx and now none of the dba are showing a display.
any suggestions?
any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
M3904 Add On DBA - Display Issues
- Thread starter fartingcamel
- Start date
- Status
Make sure the programming is there and is correct. An INI will load from the last backup of the data base, so if you have an old backup, possibly prior to you programming the hardware, you could see this. This is a bit of a stretch, if you were not getting back ups, you would get an alarm, but stranger things have happened.
- Thread starter
- #4
fartingcamel
Technical User
So. I have no idea what happened in the system, but the DBA is now up and working on all phones.
- Status
Similar threads
- Locked
- Question