Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

m3902 - key 5 mwk

Status
Not open for further replies.

drange

Technical User
Dec 29, 2005
30
NO
Hello.

I just got ahold on some 3902's and I wondered what I can program on key 5.

According to a paragraph I found at google, only MWK and NUL is possible, but what is MWK?
 
M3902 Key Descriptions

Key 0 Directory Number
Key 1 Feature or Auto Dial
Key 2 Feature or Auto Dial
Key 3 Feature or Auto Dial
Key 4 Call Transfer (Default) or 3/6 Party Conference
Key 5 Message Waiting

Note: DO NOT configure Keys 1-5 as:
* Multiple Call Non-Ringing
* Multiple Call Ringing
* Private Line Non-Ringing
* Private Line Ringing
* Single Call Non-Ringing
* Single Call Ringing

Good Luck,

L.A.CityTech
 
But when I tried to type
KEY 5 mwk
I got an error. Do you need the error code or am I doing something obvious mistake here?
 
You have to change the CLS MMA first before you can change the MWK.
 
message waiting allow, in cls

john poole
bellsouth business
columbia,sc
 
also on your mwk key add the acd dn of your voice mail, the same number that your call to check mail, in my case it 3301

chg
3902
3 1
echg yes
cls mwa
key 5 mwk 3301

that will not only light the overhead and the key but press key 0, then key 5, it auto dials the mail, then a # then the password.. that tells mail your calling from the set that you are trying to log into... in other words "she" will not ask mailbox

john poole
bellsouth business
columbia,sc
 
If you are using OTM for your entries it will be slightly different. Key 5 will have a box for the MWK digit entires then click ok, done and send it on.
 
That didn't quite work as planned. I tried to enter the number to the callpilot (77777) but that was apparently not a MC DN, so I tried to enter my own number, which kind of worked. I got a red flash when I had new messages, but I couldn't call that number (to myself).
 
prt a set, the hunt and fdn are usually set to the vsdn for mail, here's my set

Code:
DES  SWITCH
TN   056 0 14 14
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
[COLOR=red]FDN  3301[/color]
TGAR 4
LDN  NO
NCOS 7
SGRP 0
RNPG 277
SCI  0
SSU
LNRS 16
XLST
SCPW
CLS  UNR FBD WTA LPR PUA MTA FNA HTA TDD HFA GRLD CRPD STSA
     MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG3
     POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
     CFTD SFD MRD DDV CNID CDCD MSID DAPA BFED RCBD
     ICDD CDMD LLCN MCTA CLBD AUTU
     GPUA DPUD DNDA CFXA ARHA FITA CLTD ASCD
     CPFA CPTA ABDD CFHD FICA NAID BUZZ AGRD MOAD AHD
     DDGA NAMA
     DRDD EXR0
     USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO  1
[COLOR=red]HUNT 3301[/color]
LHK  2
LPK  10
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY  00 MCR 4940 5     MARP
        CPND
          NAME John Poole'
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     01 MCR 4940 5
        CPND
          NAME John Poole'
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     02 MCR 4940 5
        CPND
          NAME John Poole'
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     03 TRC
     04 SCC 0080
     05 SCN 8811 0
        CPND
          NAME Heart center IDF
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     06 SCR 8004 0     MARP
     07
     08 MIK
     09 MCK
     10
     11
     12
     13
     14
     15
[COLOR=blue][B][I]     16 MWK 3301[/I][/B][/color]
     17 TRN
     18 AO6
     19 CFW 16  4940
     20 RGA
     21 PRK
     22 RNP
     23
     24 PRS
     25
     26 CPN
     27 CLT
     28 RLT
     29
     30
     31
DATE 16 JAN 2006
that sets tells me that the mwk needs to auto dial the 3301 dn..

john poole
bellsouth business
columbia,sc
 
Yes, I'm quite aware of what I'm forwarding to to get to the callpilot, and that's 77777. That's what all customers use. Still, it didn't work. But I haven't programmed my FDN/EFD og HUNT/EHT. I just cfw it.
 
either way 77777 should work as an autodial on the mwk key as long as it's a dialable dn.. don;t need the forwards or hunts in place...

john poole
bellsouth business
columbia,sc
 
Well, when I type in key 5 mwk 77777, I get an error (don't have it in front of me), saying that it's not a MC DN.

Will get back to you on the error tomorrow!

Thanks so far...
 
easy fix, ld 23 chg acd 77777 mwc yes... that will not cause problems and it will fix the problem

john poole
bellsouth business
columbia,sc
 
When I try to print or chg the 77777 in ld 23, i get the error SCH0707 - DN conflicts with existing number.
 
prt dnb 7777, usually that error is because a shorter number in in the switch

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top