M2616 Programming Assistance (& 2317)

[captainnapalmse]

Hi,

I am attempting to figure out a Meridian Opt. 11C. Most of the phones on the network are M2317s, however we are looking at switching to the M2616 (because apparently they're taking the 2317 off the market completely). Nobody here, myself included, has any real experience with this system, and most is book-learning knowledge from reading what we've been able to find.

We understand the that it's under the KEY command, but we don't know what everything does. The only one we've deciphered is ADL, and we know the SCR stuff for KEY 00 and 01. Does anybody have a list of commands available for use under KEY that would tell me how to program this 2616?

Any information would be appreciated.

//sp

 

[captainnapalmse]

Oh, and we also need to know how to figure out which key goes with which button on the phone. That's been fun trying to decipher, as well.

Thanks!

//sp

 

[Reusser]

go to nortelnetworks.com and download an input/output administrator guide. Look under LD 11. There is a list under KEY in the alphabetical section

 

[McGruff753]

Here's a basic printout from one of my 2616's for button placement. Just keep in mind I am on release 21.23 so my CLS entries may not be as up to date as yours.

DES 369A
TN 014 0 00 03
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 7979
TGAR 0
LDN NO
NCOS 3
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS UNR FBD WTA LPR MTD FNA HTA ADD HFA
MWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD PDN DDV CNID
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
USMD USRD ULAD
CPND_LANG ENG
RCO 0
HUNT 7979
LHK 1
PLEV 02
AST
IAPG 0
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 7089 MARP
CPND
NAME HR CONFERENCE RM
XPLN 16
DISPLAY_FMT FIRST,LAST
01 SCR 27089 MARP
CPND
NAME HR CONFERENCE RM
XPLN 16
DISPLAY_FMT FIRST,LAST
02 TRN
03 AO6
04 CFW 4 7000
05 SSU 0100
06 MWK 7979
07
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12 ADL 16
13 ADL 16
14 ADL 16
15
DATE 13 MAR 2003


NACT

 

[unkalary]

Simple as key 0 is the bottom right key of the 2616. Key looks like this

key 15 key 7
key 14 key 6
key 13 key 5
key 12 key 4
key 11 key 3
key 10 key 2
key 9 key 1
key 8 key 0

Key 15 is usually prgmed as Handsfree and if it is a display phone the cls should be ADD or TDD. Key 7 becomes a program key for the display and cannot be programed in software as anything. The rest of the keys can be programed as any key

 

[johnpoole]

you've got a long way to go, but the commands are the same for the 2317 as the 2616, in cls, enter the commands that end in a. hfa (hands free allow) fna (forward no answer Allow) hta (hunt allow). enter a hunt target (vm) at the hunt prompt and a forward no answer target for the fdn prompt. Almost everything else is a default except tgar and ncos (restriction stuff) which you can copy form any set. keys are trn (transer) ao6 (conference) cfd 4 (forward- up to four digits) must have fna in cls. Handfree button and the program button are free, no commands. for the button that lights and and dials mail when you have a message. use mwk xxxx (x=voice mail primary number) and mwa in class. john