it might be broken, i have to go over there and check it out
it is built as SCR, Not SCN
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
If it has a PROGRAM button and a display, press the PROGRAM and look for the Volume Control setting. One of the icons that appear in the display is for ringing. Make sure that's turned up.
Press Program button - press 00 - press 1
The phone will display your volume level on a display if available and audibly ring at that level, which you can adjust using the arrows at the bottom of the key pad.
If this does not work, try unplugging the phone for a few moments then plug back in making sure the power is completely off the phone, this will often reset it and take care of the issue. If this does not work swap the phone.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.