Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

M2616 designations

Status
Not open for further replies.

Kodaker

IS-IT--Management
Oct 7, 2005
24
CA
Does any one whereI can get designation strips for keys for 2616 type phones. I heard that there are little stickers that can be printed with a computer then stuck on keys then cap goes over it. Does anyone know where I can get them!!


 
nortel sells those, blank and preprinted if you like to tear along the dotted line.. i use excel and print the labels with a dark border then cut with snips... we have started putting in 3900 sets which are way better to label

john poole
bellsouth business
columbia,sc
 
I have an XL file that will do that for me but ihave to cut them out and fold them, time consuming....
 
Column B Cell width 10.33 and cell height 17.75 in Excel - then add some space to the left (column A) and right (C) for a fold-over. The folding is what keeps the paper in place as you place the keycap on the phone

Buying paper labels is pointless in my opinion.


~
TEKIMG19K.gif
 
I use a Brother labeler with 1/4" tape. With a little practice on how long to cut it, it fits perfectly in the cap, usually stays there when I flip it over to press the cap onto the key. Doesn't take very long, looks very nice. No tearing and folding. I don't peel the backing off either to keep the sticky stuff form working its way under the key.

For the phone number of the set (NPA.NXX.XXXX), I use 1/2" tape, but I think 3/4" will work better.

I like lableing the 3904s better. Takes no time at all!
 
Does anybody have a resorce for TN labels both analog and digital config
 
For quicky labels I use an Excel spreadsheet with the cell width at 10.00 and the height at 18.00. I don't bother with foldover because they fit snugly in the caps. This works for both 2616's and KBA's.

Steve Harmon
Greenfield, Indiana
 
We also use the Excel printing & scissors method. We tried standard copier paper but when you pop the key caps, the little paper rectangles go flying away.

So we use a medium card stock because it is thicker and fits snugly inside the clear key caps. You might need a paper clip or stick pin to remove the old key cap label. We also use the same card stock for the window under the handset.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top