ARNOLD001
Technical User
- Aug 29, 2001
- 53
need to program a m2216 phone to interface with a pc. Does anyone know the steps to program the data port of the M2216 port on back of the phone any advice is appreciated. Thanks in advance
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
M2216 data port 1
- Thread starter ARNOLD001
- Start date
- Status
-
1
- #2
redeyes1965
Technical User
Hi,
the phone connects to the PC, using an MCA card and via a serial connection to the comms port on the back of the PC.
You will need to program the data side of the phone TN (do you know how to do this, if not let me know) and give it a dn that will be used to dial to connect to the Meridian.
Once setup, you can then use Hyperterminal to dial the new data Tn, and logon to the Meridian.
You will need to change settings in the cls ie. DTAO to MCA
Hope this helps!!!
Tim
the phone connects to the PC, using an MCA card and via a serial connection to the comms port on the back of the PC.
You will need to program the data side of the phone TN (do you know how to do this, if not let me know) and give it a dn that will be used to dial to connect to the Meridian.
Once setup, you can then use Hyperterminal to dial the new data Tn, and logon to the Meridian.
You will need to change settings in the cls ie. DTAO to MCA
Hope this helps!!!
Tim
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question