luvu stops at CDEN prompt 1

[mkrice2]

Using Opt11C CLI.
>ld 20

REQ: luvu
REQ PRT
SCH0100
REQ: luvu
TYPE: 2000
TN
CDEN

Stops right there and won't give any output.
How do I fix this?

Matt

 

[phonz1]

hit enter a few more times, otherwise, your out of those voice units.. try TYPE 3900 once

 

[acewarlock]

Quote:

Stops right there and won't give any output.
How do I fix this?


Install more CARDS, you don't have any left.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[mkrice2]

I have hit enter a few more times. It locks for 3903 as well. I know I have more space available for those phones.

Thanks for the quick response though!

 

[bigindian65]

stat your loops in 32 - minus the unit.

.stat 4 0 0

If UNEQ you'll see it. (unless you can't do that on 11s/)

Mato' Was'aka

 

[acewarlock]

Yes you have more space for more CARDS, but you don't have any units left on any of the cards you have in the system now.

Buy More cards and put them in.

A Digital card is the same know matter if you type 3903, 3904, 3905, 2616, 2216 or any other Digital type of phone model.

You don't have any unused units




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[mkrice2]

Thanks again for quick response.
Why won't it tell me that there is no more room? Is there another way?

 

[phonz1]

it's Nortel...... that's all.. In ld 11, when you go into it there is a header, what are your digital licenses left? What release do you have

 

[mkrice2]

>ld 11
SL1000
MEM AVAIL: (U/P): 2698098 USED U P: 314620 83857 TOT: 3096575
DISK RECS AVAIL: 640
DIGITAL TELEPHONES AVAIL: 3 USED: 61 TOT: 64
IP USERS AVAIL: 400 USED: 0 TOT: 400
BASIC IP USERS AVAIL: 0 USED: 0 TOT: 0
ACD AGENTS AVAIL: 300 USED: 0 TOT: 300
PCA AVAIL: 0 USED: 0 TOT: 0
AST AVAIL: 400 USED: 0 TOT: 400
TNS AVAIL: 4844 USED: 156 TOT: 5000
DATA PORTS AVAIL: 2500 USED: 0 TOT: 2500


REQ iss

BRANCH MEDIA GATEWAY
VERSION 2121
RELEASE 4
ISSUE 00 T +
IDLE_SET_DISPLAY XXXXXXXXXXXXX (Removed by me)


Only three left but....

 

[hawks]

Looks like you only have software for 3 more sets. As far as the LUVU command, that tells you if there is any avalible TN's on a card that you already have built. If I'm guessing what you have I would say 4 Digital cards with all the TN's already built out. Maybe a couple built as 2250 or pwr for 2250.

 

[phonz1]

yep, you need digital licenses and a couple of cards if you want to add any more sets. Like Hawks said, go through the system and look for any sets that you aren't using and out and re use those TN's

 

[johnpoole]

on the 11 it's pretty easy to stat each card.. you may have built digital sets that are unplugged.. ldis 1 from 32 will list disabled in cab 1...

ld 117
inv generate midnight, then tomorrow you can inv prt sets..

any of those may locate wasted tn's and lic...

john poole
bellsouth business
columbia,sc

 

[acewarlock]

This has nothing to do with any licening when you do LUVU, it has to do with the CARDs and if you have any SPARE UNITS left on the CARD. If you had 1000 TN LIC's left, it won't help if you don't have any spare units on the card.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[phonz1]

Ace, just proactively asking that question, I realize that!

 

[acewarlock]

It seemed that it was just confusing Mkrice2 more, I think he need's a tech to maintain the system or more training.

Quote
"Why won't it tell me that there is no more room? Is there another way?





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[mkrice2]

Johnpoole,
This is what I get in ld 117. Tested the two other locations and they work just fine.

I'll be the first to admit that I need more training. I read posts and search b4 asking any question on this site.


>ld 117
OAM000

MEM AVAIL: (U/P): 2698098 USED U P: 314620 83857 TOT: 3096575
DISK RECS AVAIL: 640
SURVIVABILITY AVAIL: 0 USED: 0 TOT: 0
=> inv prt sets
Set inventory:
Sets file is Non-existent, try again later

 

[hawks]

go to LD 32 and try this

LDIS 0 0

It should list all phones that are programmed but Disabled on the TN's of the system.

 

[mkrice2]

Thanks hawks here is what I get
>ld 32
NPR000
.ldis 0 0
LOOP DSBL

 

[phonz1]

look in your book, in 117 you need to generate an inventory first, then you can print it. I dont have my books right here

 

[mkrice2]

books, I should have books?
I'm kidding, I know I should have books, I just don't have books.

Is there a place I can get the books?

I did ld 117
generate prt sets

it finished and I was able to prt the sets
It doesn't tell me however the unused sets or list a name associated with the sets.

What's next?