Lucent Legend 7.0 Controller MLM-007 VM

[kmahnken]

I have a Lucent Legend running 7.x and an MLM-007 VM module. The MLM-007 has 4 ports. We lost power and when the unit came back up the 4 MLM-007 ports were OOS/Busied out. THey were on 144, 145, 146 and 147. Dial the extension internally and you get an OOS/Busy signal. The lowest MLM-007 VM channel would flash red. I tried our spare MLM-007 and the problem remained - not the card.

I tried everything I could think of and the only soution was to move the card from slot 6 to slot 7. After completing the remapping of VMI-Integration and assignment of other calling group functions the VM and Auto Attendant are back in service. I still get the OOS / Busy indicator on 144, 145, 146 and 147.

Anyone have an idea of what could cause this type of an issue?

 

[merlinman]

I am not sure if you tried it, but have you done a "Board Renumber"?

It also could be a bad power unit or the connection between the 2 carriers.

Is there anything else in the 2nd Carrier?

http://home.comcast.net/~merlinman

-merlinmansblog.blogspot.com

 

[kmahnken]

Thank you.

There are 2 modules the MLM-007 card and another 12port T/R card for classic analog phones. I did replace the power supply and I reseated the carrier when I had the unit down for the power supply swap.

It may just be old age

 

[merlinman]

I doubt that it's old age, I'm way past 65 and I can still work on these with a great deal of success.

http://home.comcast.net/~merlinman

-merlinmansblog.blogspot.com