LUC on Option 11C

[coniglio]

I am at one of my remote sites that has an Option 11C on rls. 25.3. There are four physical cabinets on the wall. But when I do an LUC this is what I get:

REQ: LUC
006 *
039 * (this is the last physical slot since this is the 4th cabinet)
041 *
042 *
043 *
044 *
045 *
046 *
047 *
048 *
049 *
050 *
062 *
063 *
064 *
How do all these other card slots show up when they don't exist? Thank you for your help.

 

[ArchibaldJCox]

My guess would be you have some Phantoms on some of those loops and that others may have at one time had something programmed on them incorrectly and now you have spare TNs. Can you use the LUU command on any of those 'loops'?

Arch

 

[cpm23]

Check to see if you have any phantom loops built. I have loop 96 built as a phantom. I've used card 61 for phantom TNs and 62,63,and 64 show up when I print LUC.

 

[DDionne]

cpm23 is correct. Also, Option 11s can now support up to 5 cabinets. That means card slots go up to 50. If you have Cabinet 4 installed, then the card slots for the fifth cabinet will display in an LUC. And by the way, your last card slot on Cab#4 is 40 not 39.

DD

 

[mluckie1]

Check to see if the second expansion card is a dual port card. 60 up are phantom cards.

 

[johnpoole]

looks like you have another system to clean up

john poole
bellsouth business
columbia,sc

 

[coniglio]

I thought 40 meant the first slot in the fifth cabinet but obviously I'm incorrect. I'll check everything else. thanks, all.