ls/ds vs. T1 1

[RYLSFAN]

MICS w/ 6.1 and fractional T1 (6 channels)no pri, with 1 ls/ds card. calls over ls/ds are able to be connected to the vmail with F986, but calls on the T1 will not, they just sit there. So we upgrade to 7.0 and still the same problem. Any call on the T1 can not be transfered to mail.

please help

tia

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[webephones]

my engineer says check and make sure ani is set to no in trunk programming

If i lived in colorado i would be skiing already.But i dont so its a long 4 weeks till opening day.

 

[RYLSFAN]

get this. you call the office on the T and don't answer, the AA picks up. You try and transfer the call to the mailbox, the mail acts like there is no call at all.....jez what next...

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[RYLSFAN]

call off the dogs, once i was able to dial into the switch i found that the tech had only programmed 1 intercom button, once the second was added, the calls were all handled normally. thanks for ALL the help, you guys are great.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[hawks]

Great glad that was it.......but I don't understand why it worked on the copper trunks? were they testing with a different phone?

 

[RYLSFAN]

no i think the difference is that when on copper the line was able to hold the call and the intercom was used to call the vm. when on a T1 channel in order to "hold" the call before going to vmail it had to use up the intercom button and didn't have one to go to the vmail on...

hawks and webephones thanks for all your help..

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[hawks]

No pbroblem thanks for the info