Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
LPU display 6064
- Thread starter bolivar
- Start date
It means there's a problem with the DSU card in Mag 0. Check the cables and the card position. You might need to replace it.
You could also try to swap the DSU with the one from Mag1 and see if the fault code changes to 61xx, if the fault follows the board then the board is dodgy, if the fault remains in Mag0 then there's something wrong with the cabling or backplane.
You could also try to swap the DSU with the one from Mag1 and see if the fault code changes to 61xx, if the fault follows the board then the board is dodgy, if the fault remains in Mag0 then there's something wrong with the cabling or backplane.
- Status
Similar threads
- Locked
- Question
