Loud buzz when ip office grabs an analog line 1

[ArlinC]

This ip office that i recently installed is giving me a loud buzz when it grabs an analog line and after awhile it will drop the line. It happens with every line and every port on the sys. The lines are Verizon Fios that im using. The Comcast lines that they switched from worked fine. Does anybody know a solution to this problem?

 

[cruzades]

Have you tried to use Data filter before terminating the line to IPO's CO port? I suspected that the line sends a data instead of pure voice.

 

[TISTech1]

I was having the same issue, but the data filters took care of the problem.

Thanks!

I Reject Your Reality And Substitute My Own.

APSS , ACIS , & ACSS – SME

 

[Westi]

make sure you do the impedance matching in the line settings.
each line separately not one setting for all because sometimes the settings come out differently for each line.

Joe W.

FHandw, ACSS (SME), ACIS (SME)

http://convergednetworks.ca

Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.

 

[Telecomboy]

I agree with Westi. Always runs Impedence match for each line.