Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lost password on Saved config file

Status
Not open for further replies.

LRB45

Programmer
Oct 5, 2005
157
US
Is there any recovery method for a saved configuration file that the password has been lost for?
 
Wouldn't be much of security if you could just recover it.


"Trying is the first step to failure..." - Homer
 
I hear ya but figured it was worth at least asking.
 
A few years back, I was given a copy that I still have called
"SetupRevelationV2.exe". I saw it being used to highlight a password on an IPO config.

I don't know what password it found, but I did see one listed when the chap used it.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
I cant remember, but do you need the password to push the config to a spare IP Office control unit? You might be able to push it to a spare unit and do a password reset and then re-save the config. just a thought?
 
Another thought would be to rename the file to config.cfg and load it to an SD /primary folder and see what happens.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top