Lost P/w for "older sx 200" (assuming non ICP)

[JimHilton]

My peer in Vancouver has has asked me to help him with doing maint on 2 200 systems there.

1 can we have the p/w for it and I maint it, the second one at another location has no more maint contract and he was never provide (or didn't ask) for it.

Anyhow I know it considered a bad omen to ask for the instructions on here, but I would be very willing to call one you folkz if you wouldn't mind.

Thanks!!

Jim

(I knew I should have put nytalkin's number someplace safe!

 

[LoopyLou]

You can get Mitel product support to reset passwords on an SX200. They require a modem directly connected to the SX200. Not sure if there is a charge for this or not.

The single biggest problem with communications is the illusion that it has taken place.

 

[JimHilton]

Hi Loopy, its big bucks to get them to do it, i'm not even sure if the system is worth it.

I'll try the defaults first. If they need a modem, I am lead to believe that they do it before the system loads up.

 

[kwbMitel]

Jim,

If you can access via Maint2 with password 1000, then you can get a backup.

With a backup, you have options that I would rather not discuss here.

**********************************************
What's most important is that you realise ... There is no spoon.