Looking for settings - ISDN PRI tie trunks between 2 G3's

[phoneguy200111]

I've played with this for an hour and can't seem to find the right solution. The book isn't all that helpful. What I want to do is take create 'tie trunks' between 2 Definitys (one is in use, the other is a spare I'm testing something on). I will create 2 ISDN PRI trunk groups for this purpose. My problem is finding the right combination of settings to get the D channel up between the 2 systems. The T1 is fine, it's the D channel I'm having trouble with. I know there are settings in the DS1 programming that is relavant and maybe on the signaling group page, but like I said, I've tried several different combos and still can't get it up and running. If you've done this, please tell me how you have each side setup. All I want to be able to do is send calls back and forth on these trunks between the 2 systems - using an ISDN PRI trunk group. Thanks

 

[phoneguy200111]

Ok, never mind. I overlooked the com. proc., com link and data mod settings in the si. It's working now

 

[ajc718]

Well seeing as you figured it out maybe you can help me I am having the same problem and need help. Can you tell me the screens to go to.