Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for Iwatsu ADIX programming software 1

Status
Not open for further replies.

pyroflick

Systems Engineer
Sep 18, 2024
2
I donate my time as a technical consultant for a private school (translation: not taxpayer-funded so limited funds for tech). The installed Iwatsu ADIX/M system (which is only used for ICM, they have a separate system for CO lines) is working fine. I can program it the hard way using a KT+DSS, but I'd like to be able to backup and restore the programming if the NiCad dies or the CPUP ever need replaced. Yes, we should look at a newer system that is not obsolete, but all in good time. The system has CPUP/HW and EDVIF cards, so the programming port is available. I have just had no luck finding the programming software. We are running v8.15 as I know there were different versions of the programmer.

Can anyone point me to a place to get this old software?

Extra credit: a link to a newer technical manual would be great. The version I find everywhere (v5) only covers up to ADIX v6.30. There are definitely some undocumented classes/items in our database that it would be good to understand.

Thanks for any help!
 
Here is the .msi for the Icon programmer, required for ECS systems, but you may need the older Adix programmer. I was able to use the Icon programmer on some Adix systems depending on the release. Sorry I looked for the older Adix programmer but couldn't find it. I don't know if this file will still work. I had to .zip it before attaching.
 

Attachments

  • IconVNProgrammer-5.0.5359.zip
    12.4 MB · Views: 2
I may have found the Adix programmer on an old pc, zipped it but upload progress at 100% stays, maybe it's too big at 20 meg.

Edit - it's not attaching after completed.
 
I may have found the Adix programmer on an old pc, zipped it but upload progress at 100% stays, maybe it's too big at 20 meg.

Edit - it's not attaching after completed.
Thanks keyset6, the ADIX programmer works great! Was able to login, download, modify, and re-upload database. You saved the day!
 
Good deal! You're welcome. I finally got it off the older of 2 old laptops.

I sent you a PM.
 
Last edited:
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top