Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Long Distance Dialing Code

Status
Not open for further replies.

twizitid

IS-IT--Management
Mar 28, 2007
56
US
One of my facilities is setup so that certain stations have to dial a code in order to dial long distance or numbers outside of their COR.

Any ideas how this is done? I'm looking to use this same thing at another facility I maintain.

The caller would dial the number 9-1-555-1234, they would then get a 2nd dial tone kind of thing, and then enter the dialing code 2257 or something similar and the call would then go through.
 
It sounds to me like you are using authorization codes to place calls. This feature has RTU if it is not turned on. Look under "disp sys cust" to see if it is. Then if you would like to look more into it you can find the full description in the

Feature description and Implementation for communications manager manual 555-245-205


"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594


 
Oh, beautiful.

Thanks much guys, that looks to be it exactly.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top