Long Distance Call Access Codes

[chancal]

Hello,
Never used this feature before.
Apparently you can assign codes for users to punch in so that they can make long distance calls?

what LD is it to create/config a code?
Can you print out all the codes that are assigned to respective users?

thank you

 

[56BelAir]

LD 88

 

[one234]

I think you mean authorization codes. You can configure them in LD 88.

Although they do not specifically apply to long distance calls. You can configure a NCOS for the authorization code.


Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...

 

[chancal]

ok.
so this is all i see for both AUB or AUT.
REQ prt
TYPE aub
CUST 0
AUTH006

REQ prt
TYPE aut
CUST 0
AUTH006
CUST 1
AUTH003
CUST 0
AUTH001

Am I supposed to lookup these AUTHxxx in some other command?

 

[56BelAir]

You need to build the groups, none are assigned by default

 

[one234]

AUTH006 tells you that the Authcode database doesn't exist. You must create 1 before you can print 1


Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...

 

[chancal]

oh. you mean there are no auth codes built at all?
i just received a ticket from a user at this site that says they would require a new "Long Distance Access Code".
Any ideas how else they are doing this then, if not through LD88?
Sorry should have clarified that users are already using them somehow.

 

[56BelAir]

Most likely they are provided by the LEC and are provided on the phone bill so they can account for LD charges.

 

[chancal]

Yes you are correct BelAir. That is what they are doing. I should have asked them first thing this morning. What a waste of an hour...
thank you