LOGIN REJECTED

[lanpham_imported]

Dear all!
Many days, I have got a broblem. Please can anyone help me!
I control my MD110 system by NIU card Ethernet port.
I ping to Niu card very good but when i telnet to Ethernet address then display: Login Rejected. ( Note: Other V24 on Niu card still work )
I have ever reset Niu card but not ok.
Please give me some helps soon!
Thanks and best regard!

 

[user25]

When you got the msg "Login rejected" you have to wait for 20mn and after that try again to login.

 

[himdp]

Login rejected" is hacker protection which is activated after 3 failed login attempts. As user25 states, this will last for 20 minutes, however if you try to login after only 19 minutes, the 20 minute timer is started again so be patient

 

[parnum]

RFPUI:UNIT=TWP3,LIM=1;

Will reset it

Best parnum

 

[himdp]

Only if you can log in!

 

[parnum]

He says the V24 ports are ok...

 

[himdp]

He mentioned "Other V24" I took that to mean CIL however if he can access MML via V.24 I agree that a restart of TWP3 as you suggest will clear the login protecton.

 

[nithin6926]

Hi Buddy

Did you already use this ethernet connection to NIU, or trying lately to access it??

Just one thing to check if you are trying it lately, Did you initiate the IO port for MML login??

If you are able to login through the serial ports, take a IODDP print.

--
Nithin

--
Nithin

 

[lanpham_imported]

Many thanks all!
Please see IODDP command below:
<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU SIPOS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 3 IBM IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN TERM2 001-0-60-2 - MML - 7
SYSN CAMCG 001-0-60-3 - OUT IN SERVICE
SYSN DNA-OWS 001-0-60-4 - NETWORK/OUT IN SERVICE
SYSN TELNET 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET2 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET3 001-0-60-4 - NETWORK/MML - 7
SYSN TELNET4 001-0-60-4 - NETWORK/MML - 7
NIU2 - 001-1-70 - - IN SERVICE
NIU2 NIU2TERM1 001-1-70-1 - MML - 7
NIU2 NIU2CIL 001-1-70-2 - OUT IN SERVICE
NIU2 AUTOALARM 001-1-70-3 - MML - 7
NIU2 ALARM 001-1-70-4 - NETWORK/OUT IN SERVICE
NIU2 NIU2TEL2 001-1-70-4 - NETWORK/MML - 7
NIU2 NIU2TEL3 001-1-70-4 - NETWORK/MML - 7
NIU2 NIU2TEL4 001-1-70-4 - NETWORK/MML - 7
NIU2 NIU2TEL5 001-1-70-4 - NETWORK/MML - 7
NIU2 NIU2TEL6 001-1-70-4 - NETWORK/MML - 7
END

Now, i am loginning my MD110 system by other Niu ( that is 1-0-60-1 - serial port)
I can't login system by NIU card ethernet port 1-1-70-4. But ping is ok. Telnet still "Login reject".
I haven't tried RFPUI as Parnum's help yet. Because i am afraid of it affects to my system.
Please help me!
Thanks all!

 

[parnum]

Restart of TWP3 only affects port 4 ethernet on NIU(s) in a lim, just do it and your problems should be over!

Best parnum

 

[lanpham_imported]

Thank for Parnum's help!
I used RFPUI commamd.
The result is excellent!
....
Best!

 

[himdp]

In that case it would be nice of you to give him a star for his help.