Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Login Problem

Status
Not open for further replies.

hhhhkk

MIS
Oct 11, 2007
55
0
0
US
I have some problem login to the system.This is the error message I got.
TTY 04 SCH MTC BUG 9:40
OVL111 IDLE 0

No matter what I typed this message will pop up on the screen.The one place I can login is the console. Any idea? Thanks in advanced.

 
That's not really an error message. post logi attempt, is it getting to the pass prompt?

Mato' Was'aka
 
no, When I type the first letter 'l' , the message will interrupt me. weird.
 
What version of software. Try all Caps. Used to be older systems required you to log in in CAPS.

LOGI ACME
PASS LUMBER

Like that.

John
 
I tried CAPS and it didn't work. no matter what I type, it will interrupt me on first letter.
 
Please scan and post here what you are doing so we can see it.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
tera term

here is the login screen

DCH: 2 MSG LOG INDICATION TIME: 10:56:38
ALERT:42333
PROC:56540
PROG:10957
SETUP:36933
CONNECT:49342
CONNACK:35076
DISCONN:28282
RELEASE:65535
RESTACK:7
REL COP:29372
STATUS:50045
NOTIFY:3864


TTY 04 SCH MTC BUG 10:57
OVL111 IDLE 0
> <---------I try to type letter 'l' for login and the message interrupt me.
TTY 04 SCH MTC BUG 10:57
OVL111 IDLE 0
 
What type of term are you using?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Try hyperterminal and see if you get the same problem...
Could be a teraterm config problem.

I2007
 
is tera term a software program or is it a hardware term like a PC?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
I tried Hyper Term. It did same thing to me.
 
Could have something to do with the fact that you are on TTY 4 which probably resides on your expansion cabinet 1. Try another TTY port.
 
I am new to this system. Where can I find TTY port? Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top