Here is the scenario. There is a PDC in our main location with a 56k PPP link to an annex building down the street. Users in the annex are having difficulty logging onto the PDC. When their machines (a mixture of Win 95/98) boot and the log on box is first displayed, if they enter their password they are denied access. If they wait a few seconds (30) or cancel out then try to log in after the machine fully boots, they can log in to the PDC without any problem. I know this is a Netbios issue. All PC's have LMHosts files pointing to the ip address of the PDC. A Cisco 1602 router is on each end of the link with ip helper addresses configured pointing to the PDC. Any ideas? [sig]<p>Mark Sargent<br><a href=mailto:sargent@getadvanced.net>sargent@getadvanced.net</a><br><a href= </a><br> [/sig]
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Logging into a PDC over 56K PPP link
- Thread starter marksgt
- Start date
tractorBoy
MIS
Why not stick a BDC in the annex building? [sig][/sig]
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question