locl call type in route pattern

[phonechik]

I am looking for specs on what Avaya is sending when the call type in a route pattern is hnpa versus locl.
When changing a customer over from one PRI service to Bell in Canada my S8300's are not able to make local calls using hnpa as they were before.
More important the alrt feature for crisis alert is no longer working when locl is entered as call type for 911 calls (alrt does not pass the call)
Any info on what locl and hnpa are sending to telco would be appreciated .
thanks

 

[manfmmd]

It depends on what Prefix Mark you are using:

Entry Description
0 -Suppress a user-dialed prefix digit 1 for 10-digit FNPA calls.
  -Leave a user-dialed prefix digit 1 for 7-digit HNPA calls.
  -Leave a prefix digit 1 on 10-digit calls that are not FNPA or HNPA calls.

Do not use Prefix Mark 0 in those areas where all long distance calls must be dialed as 1 plus 10 digits. Check with your local network provider.

1 Send a 1 on all 10-digit calls, but not on 7-digit calls. Use Prefix Mark 1 for HNPA calls that require a 1 to indicate long distance calls.

2 Send a 1 on all 10-digit and 7-digit long distance calls. Prefix Mark 2 uses a Toll Table to define long distance codes.

3 Send a 1 on all long distance calls, and keep or insert the NPA so that all long distance calls are 10-digit calls. The system inserts the NPA when a user dials a
prefix digit 1 plus 7 digits. Prefix Mark 3 uses a Toll Table to define long distance codes.

4 Always suppress a user-dialed Prefix digit 1. Use Prefix Mark 4, for example, when the system routes ISDN calls to a media server or a system that rejects calls with a prefix digit 1.

blank For TIE trunks, leave this field blank.